Favemanc ventilated
Certificates
Sustainability certificates
One of the fundamental goals for –Favemanc: is to offer the best experience to its customers. For that reason, our products are subject to the strictest of controls and the company constantly invests in cutting-edge technology to achieve the required level of excellence throughout the production process.
Certificates and Tests
CE
CE
It has the most demanding certifications both in all phases of the production process and in design, as well as those required for the final products obtained. The CE Marking indicates the conformity of a product with the Community Directives that require the manufacturer, as well as that the product in question complies with the Community Provisions related to its production.
DAP
Our ceramic panels come with the DAPcons® seal of quality, putting them in the highest sustainability category following an assessment of the environmental impact throughout the product life cycle. The goal of an Environmental Product Declaration (EPD) is to encourage the demand for and production of those products with a lesser impact by sharing rigorous and verifiable environmental information.
EPDs enable quantified environmental information on the life cycle of a product to be shared, communicated and disclosed. This type of EDP covers the production stage (manufacture), construction of the building, use and maintenance (lifespan), demolition and waste processing and disposal.
Through this EPD, we have taken another step towards the standardisation and certification of our products under European Construction Product Regulations or such building certification models as LEED or BREEAM.
ISO
UNE-EN ISO 9001
It meets the UNE-EN ISO 9001 Quality Management standards under certification by Bureau Veritas.
UNE-EN ISO 14001
Our Quality and Environment Policy provides a framework of reference for defining, revising and meeting overall and specific targets, and applies to every area of the company in terms of environmental management.
The Health Product Declaration (HPD)
This declaration uses a standardised system to establish the contents of construction materials and the effects on health associated with those materials based on the HPD list of priority hazards, in the GreenScreen List Translator™ and GreenScreen®.
DIT
Our ceramic panels have been impartially guaranteed due to their technical suitability for installation in homes or workplaces by a major institution in the world of construction: the Eduardo Torroja Construction Sciences Institute.
Certificates and Tests
USA
AAMA
AAMA 509-14
Certified by the Association of American Architectural Manufacturers via its voluntary testing and classification method for wall cladding systems with drained rain panels and rear ventilation.
AAMA 5011-17
Certified by the Association of American Architectural Manufacturers via its standard testing method for water penetration in windows, curtain walls and doors using dynamic pressure.
ASTM E283-04
Standard testing method for determining the rate at which air leaks through exterior windows, curtain walls and doors under pressure differences.
ASTM Internacional
ASTM E331-00
Water penetration in exterior windows, skylights, doors and curtain walls via a uniform static air pressure difference.
ASTM E330/E330M-14
Standard testing method for the structural performance of exterior windows, doors, skylights and curtain walls via a uniform static air pressure difference.
ASTM C1026-13(2018)
Standard testing method for measuring the resistance of ceramic and glass panels to
freezing and thawing cycles.
ASTM E1980-11
Standard method for calculating the solar reflectance index of opaque horizontal surfaces
and slightly inclined surfaces.
ASTM D1929-20
Standard testing method for determining the ignition temperature of plastics.
ASTM C67
Standard testing method for sampling and testing structural clay bricks and tiles.
ASTM C648
Standard testing method for the tensile strength of ceramic tiles.
ASTM G154
Standard method for the operation of apparatus with fluorescent ultraviolet (UV) lamps for the exposure of materials.
Certificates and Tests
United Arab Emirates
TBW0300729 – TBW0300730
Thomas Bell-Wright International Consultants is a private engineering firm with multiple accreditations and headquarters in Dubai that provides independent Testing, Inspection and Certification (TIC) services, mainly to the building construction sector, and is accredited under ISO 17025 (Testing laboratory), ISO 17020 (Inspections), ISO 17065 (Certification body) and AC291 (Special inspections agency) provided in various ways by the United Kingdom Accreditation Service (UKAS), the International Accreditation Service (IAS) in the US A, the International Accreditation Centre of the Emirates (EIAC), the Accreditation Centre of the Gulf (GAC) and the National Accreditation System of the Emirates (ENAS).